HP HPE7-A01 Valid Test Practice, Lab HPE7-A01 Questions

Wiki Article

DOWNLOAD the newest Lead2Passed HPE7-A01 PDF dumps from Cloud Storage for free: https://drive.google.com/open?id=1nIuCAGcio3WEm_Rh08R7DBgDCqgR6627

We are a team of certified professionals with lots of experience in editing HPE7-A01 exam questions. Every candidate should have more than 11 years' education experience in this filed of HPE7-A01 study guide. We have rather a large influence over quite a quantity of candidates. We are more than more popular by our high passing rate and high quality of our HPE7-A01 Study Guide. Our education team of professionals will give you the best of what you deserve. If you are headache about your HPE7-A01 certification exams, our HPE7-A01 training materials will be your best select.

The HP HPE7-A01 exam consists of 60 multiple-choice questions that cover a range of topics related to wireless networking, including network fundamentals, wireless LAN design, installation and configuration, troubleshooting, and security. HPE7-A01 Exam is timed and candidates have 90 minutes to complete it. To pass the exam, candidates must score at least 65%.

>> HP HPE7-A01 Valid Test Practice <<

Aruba Certified Campus Access Professional Exam pass4sure cram - HPE7-A01 pdf vce & Aruba Certified Campus Access Professional Exam practice torrent

Lead2Passed's HP HPE7-A01 practice exam software tracks your performance and provides results on the spot about your attempt. In this way, our Aruba Certified Campus Access Professional Exam (HPE7-A01) simulation software encourages self-analysis and self-improvement. Questions in the HP HPE7-A01 Practice Test software bear a striking resemblance to those of the real test.

HP Aruba Certified Campus Access Professional Exam Sample Questions (Q65-Q70):

NEW QUESTION # 65
You are troubleshooting an issue with a pair of Aruba CX 8360 switches configured with VSX Each switch has multiple VRFs. You need to find the IP address of a particular client device with a known MAC address You run the "show arp" command on the primary switch in the pair but do not find a matching entry for the client MAC address.
The client device is connected to an Aruba CX 6100 switch by VSX LAG.
Which action can be used to find the IP address successfully?

Answer: D

Explanation:
The show arp command displays the ARP table for a specific VRF or all VRFs on the switch. The ARP table contains the IP address to MAC address mappings for hosts that are directly connected to the switch or reachable through a gateway. If the client device is connected to another switch by VSX LAG, the ARP entry for the client device will not be present on the primary switch unless it has communicated with it recently.
Therefore, to find the IP address of theclient device, the administrator should run the show arp command on the secondary switch in the VSX pair, specifying the VRF name that contains the client device's subnet.References:https://techhub.hpe.com/eginfolib/Aruba/OS-CX_10.04/5200-6692/GUID-9B8F6E8F-9C7A-


NEW QUESTION # 66
A customer has a site with 200 AP-515 access points 75AP-565 access points installed. The customer is rolling out new mobile phones with Wi-Fi-calling. 802.1X is in use for authentication.
What should be enabled to ensure the best roaming experience?

Answer: A

Explanation:
https://www.howtogeek.com/794724/what-is-wi-fi-calling/ 2:
https://www.networkcomputing.com/networking/your-network-optimized-wifi-calling 3:
https://www.arubanetworks.com/techdocs/AOS-CX/10.10/HTML/monitoring_6300-
6400/Content/Chp_LEDs/fr Wi-Fi calling is a feature that allows you to make or receive voice calls over Wi-Fi instead of cellular network.
Wi-Fi calling can provide better voice quality and reliability in areas with poor or no cellular coverage.


NEW QUESTION # 67
A customer has a large number of food-producing machines
* All machines are connected via Aruba CX6200 switches in VLANs 100.110. and 120
* Several external technicians are maintaining this special equipment
What are the correct commands to ensure that no rogue DHCP server will impact the network?

Answer: C

Explanation:
Option A shows the correct commands to ensure that no rogue DHCP server will impact the network.
The commands include the following steps:
* Enable DHCP snooping on the switch. DHCP snooping is a feature that prevents rogue DHCP servers from offering IP addresses to clients by filtering DHCP messages based on trusted and untrusted ports1.
* Configure VLANs 100, 110, and 120 as DHCP snooping VLANs. This means that DHCP snooping will be applied to these VLANs and any untrusted DHCP messages received on these VLANs will be dropped1.
* Configure LAG 1 as a trusted port for DHCP snooping. This means that any DHCP messages received on LAG 1 will be allowed and not filtered by DHCP snooping. LAG 1 is assumed to be connected to a legitimate DHCP server or a router that relays DHCP requests to a legitimate DHCP server1.
Option B is incorrect because it does not enable DHCP snooping on the switch or configure VLANs 100,
110, and 120 as DHCP snooping VLANs. Option C is incorrect because it does not configure LAG 1 as a trusted port for DHCP snooping. Option D is incorrect because it does not enable DHCP snooping on the switch or configure LAG 1 as a trusted port for DHCP snooping.
References: 1 https://techhub.hpe.com/eginfolib/Aruba/OS-CX_10.04/5200-6692/GUID-BD3E0A5F- FE4C-4B9B-BE1D-FE7


NEW QUESTION # 68
Which standard supported by some HPE Aruba Networking APs can enable a customer to accurately locate wireless client devices within a few meters?

Answer: D


NEW QUESTION # 69
A system engineer needs to preconfigure several Aruba CX 6300 switches that will be sent to a remote office An untrained local field technician will do the rollout of the switches and the mounting of several AP-515s and AP-575S. Cables running to theAPs are not labeled. The VLANs are already preconfigured to VLAN 100 (mgmt), VLAN 200 (clients), and VLAN 300 (guests). What is the correct configuration to ensure that APs will work properly?

Answer: C

Explanation:
Option C is the correct configuration to ensure that APs will work properly. It uses the ap command to configure a port profile for APs with VLAN 100 as the native VLAN and VLAN 200 and 300 as tagged VLANs. It also enables LLDP on the ports to discover the APs and assign them to the port profile automatically. The other options are incorrect because they either do not use the ap command, do not enable LLDP, or do not configure the VLANs correctly.


NEW QUESTION # 70
......

Before clients buy our HPE7-A01 questions torrent they can download them and try out them freely. The pages of our product provide the demo and the aim is to let the client know part of our titles before their purchase and what form our HPE7-A01 guide torrent is. The pages introduce the quantity of our questions and answers of our HPE7-A01 Guide Torrent. After you try out the free demo you could decide whether our HPE7-A01 exam torrent is worthy to buy or not. So you needn't worry that you will waste your money or our HPE7-A01 exam torrent is useless and boosts no values.

Lab HPE7-A01 Questions: https://www.lead2passed.com/HP/HPE7-A01-practice-exam-dumps.html

P.S. Free & New HPE7-A01 dumps are available on Google Drive shared by Lead2Passed: https://drive.google.com/open?id=1nIuCAGcio3WEm_Rh08R7DBgDCqgR6627

Report this wiki page